Articles on: Voiply Home

Factory Reset Voiply Adapter

With the Voiply Adapter powered on, unplug the blue Ethernet cable from the Internet port.

Voiply Adapter Back

Locate the pin-sized-hole labeled "Reset" on the back of the Voiply Adapter.

Insert something into the hole such as a paperclip. Press and hold the Reset button for 10 seconds (you should hear a click when you initially press in) until all 3 lights blink, then release the Reset button.

Voiply Adapter reset with PIN

Plug the blue Ethernet Cable back into the Internet port. All 3 lights will briefly turn on, then only the power light will remain on.

Wait a few minutes for all 3 lights to turn back on. Once they're all on, your phone is ready for use.

Voiply Adapter - all lights powered on


If you are still unsure of the reset process, please view this quick how-to video: How to Factory Reset your Adapter

Updated on: 09/16/2021

Was this article helpful?

Share your feedback

Cancel

Thank you!